Price Match Guarantee!
The Richmond Essential™ RMTEX-04 is a 3.5 kW tankless electric water heater ideal for low flow point-of-use applications. Typically this unit is installed at the point-of-use and hard wired to 120 volts requiring a 30-amp breaker. Richmond Essential™ tankless electric water heaters offer a continuous, endless supply of hot water. A lower kilowatt unit can provide hot water on demand for single or multiple point-of-use applications while a higher kilowatt unit could provide hot water for a whole house depending on the inlet ground water temperature. Tankless electric water heaters save space, save energy, save money, and require no venting. The sleek, compact size, 90 percent smaller than a tank, allows you to save space and place the unit wherever you want, including under a sink. Tankless units only draw energy when hot water is flowing, while traditional tanks are constantly drawing energy to keep the water in the tank at the desired temperature.
- Save on water heating costs
- No standby heat loss, activates only when hot water is needed
- Instant, continuous hot water
- 99.8% energy efficient
- Reduces calcification and sedimentation
- Digital temperature display used to control temperature can adjust in increments of 1°F
- Requires 30 Amp breaker and 120 Volts
- Requires #10 AWG wire size
- Requires hardwire direct to electrical panel. Cannot be plugged into standard outlet.
- For inlet water temperatures of 37-62°F, the RMTEX-04 model provides a maximum temperature rise of 45°F at 0.5 gal./min.
